NJ Colored Polyurethane Topcoat CAS NO.9017-09-8

The film is hard, wearable, glossy, excellent in acid resistance and water resistance, strong adhesion, resistance to mineral oil, vegetable oil, petroleum solvents and petroleum products.

Product Introduction
It’s composed of modified polyester resin, pigment, environmental protection rust-proof filler, solvent, additives as paint part, and TDI adduct composition as curing agent part.
Product Features
The film is hard, wearable, glossy, excellent in acid resistance and water resistance, strong adhesion, resistance to mineral oil, vegetable oil, petroleum solvents and petroleum products.
Recommended Use
Middle and low grade agricultural machinery or accessories
Typical Application Of Coating
NJ colored polyurethane primer + NJ colored polyurethane topcoat
Construction Method
Air spray
Use Note
Put the curing agent into the paint according to the ratio before painting, and the qty should be according to the requirements, use it within 4hours after mixing.
Keep the tools dry and clean;
Keep the surface clean, no moisture, no acid and alkali;
Keep the painting process far away from water, acid, alkali, alcohol and other contact.
Curing agent is easy to react with water, alcohol and other things, the hardener drum must be covered in order to avoid damaged by damp cementation;

The working humidity shall not be greater than 80%, otherwise it will cause serious film foam.